Filter
Top Products
6-2 A-61092 September 1999
Operator message listing
Code Operator Message Displayed Description/Action Required
E000 Memory battery low — call service Call service — do not turn off the machine.
E100 Please wait No action required. Wait for the message to
clear.
E101 Auto shut off, press RUN
Press Run to continue. Feed documents.
E102 Press STOP and try again
Press Stop and try again.
E103 Select valid mode Invalid mode selected. Enter function code
F01 to select another mode.
E104 Function not available Invalid function code entered. Enter another
function code.
E106 Warning — document length error Check the document length to see if it is
shorter than the minimum or longer than the
maximum allowed; refeed the document.
E107 Warning — skewed document Refeed the document.
E110 Upper lamp warning, press RUN
Press Run to continue.
Change the lamps when the current set of
documents has been processed.
E111 Lower lamp warning, press RUN
Press Run to continue.
Change the lamps when the current set of
documents has been processed.
E112 Invalid patch level Invalid patch was used. Feed correct patch.
E113 Enter correct image address
Use the Next key to enter correct image
address.
E114 Check current level Check the current document image level.
Conflicting input regarding the proper level
was received.
E117
E118
E119
Enter correct level/Image Address Document image level assignment and next
image address input conflict.
Specify another document image level, or
use the Next key to enter a valid image
address.
E120 Diagnostic running — do not use Do not use; the machine is being serviced.