Filter
Top Products
6-4 A-61092 September 1999
Code Operator Message Displayed Description/Action Required
E204 Skewed document — refeed
Press Clear and use the Next key to enter
the correct image address and refeed
document(s).
E205 Level overflow — press next level
Press Clear and use the Next key to enter
the correct image address, or press a level
key for a higher level.
E206 Check print head Install the correct Document Printer print
head.
E207 Check printer installation Document Printer not correctly installed.
Properly install the Document Printer print
head.
E211 Enter correct Image Address
Use the Next key to enter the correct image
address.
E214 Document length error — refeed
Press Clear and use the Next key to enter
the correct image address and refeed
document(s).
E219 Clear error and refeed last doc
Press the Clear key. Press Run and feed the
last document.
E220 Check for jam in entrance transport Clear the document path.
Press Clear and then press the Jog key.
Press Run and refeed document(s).
E221 Clean entrance sensor Perform maintenance/cleaning procedures.
E225 Check for jam in transport Clear the document path.
Press Clear and then press the Jog key.
Press Run and refeed document(s).
E226 Clean slide-out sensor reflector Perform maintenance/cleaning procedures.
E227 Check for jam in transport Clear the document path.
Press Clear and then press the Jog key.
Press Run and refeed document(s).
E228 Check for jam in upper transport Clear the document path.
Press Clear and then press the Jog key.
Press Run and refeed document(s).
E229 Clean exit sensor Perform maintenance/cleaning procedures.