Filter
Top Products
8-14 A-61092 September 1999
Dynamic bar code
evaluation
Dynamic Bar Code Evaluation allows you to verify the speed of the Bar
Code Reader and how well your Bar Code Reader is working. This
test is performed with the transport on. Follow the procedures below
to perform the Dynamic Bar Code Evaluation test.
After selecting option 2=Transport On, the following message is
displayed:
Bar Code Type=
Leading edge distance (in):
1. Measure the distance from the leading edge of the document to the
center of the bar code.
leading edge
2. Enter the distance from the leading edge of the document to the
center of the bar code.
3. Press Enter. The transport will turn on.
4. Feed the bar code document.
5. Go to the section entitled, “Evaluating test results” to review the test
results.
center of
bar code
distance
measured