Filter
Top Products
4-10 A-61092 September 1999
Code Function Code Name Description
F72 Skew Detection Allows you to turn skew detection on or off which monitors
the amount of skew using predefined skew angle(s).
Enter 1 to turn on or 0 to turn off, then press Enter.
F73 Latched Scanning Flag Allows you to set a flag in the image headers which alerts
the host system that this document, and those which
follow, are of special interest. The flag will remain
activated for every document until it is turned off. Enter 1
to turn on or 0 to turn off, then press Enter.
F74 Momentary Scanning Flag Allows you to set a flag in the image header which alerts
the host system that this document is of special interest.
This flag is set only for that one document. Enter 1 to turn
the momentary scanning flag on, then press Enter.
F75 Footswitch Confirmation
Tone
Allows you to turn the confirmation tone on or off which
informs you when the Footswitch is pressed and/or
released. Enter 1 to turn on or 0 to turn off, then press
Enter.
F91 Select Linked Mode Allows you to switch from one application mode to
another, keeping the last image address. Enter the
number of the application mode you wish to select, then
press Enter.
F92 Fixed Field Allows you to enter a new fixed field value containing
alphanumeric characters.
NOTE: If the fixed field width for the mode you are using
is 0, and E104 error will be displayed. To correct
this, change to a mode that has a fixed field or
modify the mode you are using so the fixed field
is not 0.
F93 Action/Confirmation Tone Allows you to hear the pitch of the alarm tone.
F94 Level 1 Allows you to assign Level 1 to the next document fed into
the transport.
F95 Level 2 Allows you to assign Level 2 to the next document fed into
the transport.
F96 Level 3 Allows you to assign Level 3 to the next document fed into
the transport.
F97 Next Image Address Allows you to input the next image address. Enter the
next image address, then press Enter.
F98 Stop Allows you to stop the transport.
F99 Run Allows you to turn on the transport.