Filter
Top Products
4-8 A-61092 September 1999
Code Function Code Name Description
F46 Print Position Allows you to specify how far from the leading edge of the
document printed information will appear. Press the Up
arrow to increment the starting print position by 1 inch
(25 mm), press the Down arrow to decrement the starting
print position by 1 inch (25 mm). Press the Right arrow to
increment the starting print position by 0.125-inch (3 mm),
or press the Left arrow to decrement the starting print
position by 0.125-inch (3 mm), then press Enter.
F48 Purge Print Pattern
(for Document Printers 1
and 12)
Allows you to initiate an immediate priming ink spurt.
F48 Print Purge Head
(for Super12 Document
Printer)
Allows you to initiate an automatic purging of the print
heads.
This function can be done when the transport is off.
F49 Purge Frequency
(for Document Printer 1
and 12)
Allows you to specify how often, in terms of the number of
documents fed into the transport, a priming ink spurt is
initiated. Enter the number of documents, up to 50,000
and press Enter.
F49 Align Print Image
(for Super12 Document
Printer)
Allows you to specify how far to move the left half of an
image up or down (in increments of one line) on the
document so it will align with the right half of the image.
F50 Patch Reader 1 On/Off Allows you to turn the primary Patch Reader on or off.
Enter 1 to turn on or 0 to turn off, then press Enter.
F51 Patch Reader 2 On/Off Allows you to turn the secondary Patch Reader on or off.
Enter 1 to turn on or 0 to turn off, then press Enter.
F52 End Fed Patch Reading
On/Off
Turn End Fed Patch Reading on if you expect the patch to
be located in the vertical (vs. horizontal) position on the
document. Enter 1 to turn on or 0 to turn off, then press
Enter.
F53 Patch Reading
Confirmation Tone On/Off
Allows you to turn the confirmation tone on or off which
informs you when the Patch Reader has successfully read
a patch document. Enter 1 to turn on or 0 to turn off, then
press Enter.
F56 Printer Open Jet Test
(for Document Printers 1
and 12)
Allows you to determine whether or not there are
nonfunctional ink jets in the Super12 Document Printer
ink cartridge. Press C to return to a normal operating
display.
F56 Printer Cartridge Status
(for Super12 Document
Printer)
Allows you to determine whether or not there are
nonfunctional ink jets in the Super12 Document Printer.
Also checks the print head(s) connection to the flex cable
to assure the print heads(s) are installed properly. Press
C to return to a normal operating display.
F57 Endorser On/Off
Allows you to turn the Endorser on or off. Enter 1 to turn
on or 0 to turn off, then press Enter.