Filter
Top Products
CONTENTS INDEX SEARCH HELP
Operator’s Guide
Printing
Guide
Color Management
Calibration
Overview
Setting up the Printer
Operating the Printer
Troubleshooting
Site Specifications
Accessories
Customizing the
Printer
Network
Interface Guide
2. Press and hold the tabs that come through the top of the lid and then
remove the lid.
3. Make sure the media size settings on the tray match and that they are
correct for the media you are going to load. If necessary, adjust the
settings as follows:
– Look through the opening on the side of the tray at the sensor
label. This label shows the current media size setting.