Filter
Top Products
CONTENTS INDEX SEARCH HELP
Operator’s Guide
Printing
Guide
Color Management
Calibration
Overview
Setting up the Printer
Operating the Printer
Troubleshooting
Site Specifications
Accessories
Customizing the
Printer
Network
Interface Guide
Port (IPX) 802.2, 802.3,
SNAP, ETHERNET
2, AUTOSELECT
Specifies the framing type the
printer should expect.
AUTO-
SELECT
Port
(TCP/IP)
Fill in IP Address in
following format:
nnn.nnn.nnn.nnn
Sets up the Internet address of the
printer within a TCP/IP network.
000.000.00
0.000
Port (SCSI) Target ID 0 - 7 Specifies the printer’s SCSI
address.
5
Defaults
(Media
type)
Paper,
Transparency, Draft
• Select Paper if paper is loaded in
the tray.
• Select Transparency to print high-
density transparencies.
• Select Draft for faster printing and
proofing of transparencies.
Paper
Defaults
(Factory)
Reset Lets you restore the printer settings
to their factory default values.
IMPORTANT: If the network
interface card is installed, resetting
to the factory defaults may cause
network printing problems.
Printer Settings
Setting Options Description
Factory
Default