Filter
Top Products
CONTENTS INDEX SEARCH HELP
Operator’s Guide
Printing
Guide
Color Management
Calibration
Overview
Setting up the Printer
Operating the Printer
Troubleshooting
Site Specifications
Accessories
Customizing the
Printer
Network
Interface Guide
600 - 603 There is a controller PROM or board
failure
1. Power cycle the printer.
2. If the error persists, call for
service.
608, 609,
60A, 60C
There is a problem with the thermal
head/cable, or the controller printed
circuit board
610 There is a problem with the LCD or
the controller printed circuit board
618, 60B There is a problem with the EPROM
or the thermal head
700 The inboard thermal head position
sensor #2 is open
1. Open the top cover of the
printer.
2. Power cycle the printer.
3. Close the top cover.
4. If the error persists, call for
service.
701 The inboard thermal head position
sensor #2 is blocked
702 The outboard thermal head position
sensor #1 is open
703 The outboard thermal head position
sensor #1 is blocked
Error Codes
Error Code Description Possible Solution