Filter
Top Products
CONTENTS INDEX SEARCH HELP
Operator’s Guide
Printing
Guide
Color Management
Calibration
Overview
Setting up the Printer
Operating the Printer
Troubleshooting
Site Specifications
Accessories
Customizing the
Printer
Network
Interface Guide
708 The donor patch sensing emitters
are not sensing the donor
1. Turn the printer
Off
.
2. Disconnect all cables except
the power cable.
3. Turn the printer
On
.
4. If the error:
• persists, call for service.
• clears, the computer, cabling
or software could be causing
the problem.
709 The donor sensors are not stable
710 - 712 The DSP line time response times
out
718 There is a problem with the
controller printed circuit board
719 There is a problem with the thermal
head/controller printed circuit board
720, 721
1000 - 1FFF
There is a problem with the
controller printed circuit board/cable
730 There is a problem with the thermal
head cooling
733 There is a problem with the thermal
head heater
738, 739 There is a problem with the
controller or RAM
Error Codes
Error Code Description Possible Solution