Filter
Top Products
CONTENTS INDEX SEARCH HELP
Operator’s Guide
Printing
Guide
Color Management
Calibration
Overview
Setting up the Printer
Operating the Printer
Troubleshooting
Site Specifications
Accessories
Customizing the
Printer
Network
Interface Guide
Machine Generated Error Codes
The following are machine generated error codes:
Error Codes
Error Code Description Possible Solution
500 There is no receiver at the lead
edge sensor when expected
1. Verify that the correct media
and ribbon are loaded.
2. Clean the sensor. Refer to
“Cleaning the Sensors”.
3. If the error persists, call for
service.
501 The receiver is stuck at the lead
edge sensor
502 The receiver size has changed
without removing the tray
503 Invalid tray size input
510 The bar code label is not correct
The bar code sensor or FRU is
malfunctioning
511 The bar code label is not correct, or
it has been damaged
The bar code sensor or FRU is
malfunctioning