Konica Minolta 163 Network Card User Manual


 
Specifying printer driver settings
4
IC-206 4-19
Paper Source
Select the paper drawer loaded with the paper.
If “Auto” is selected, the paper drawer loaded with paper of the size specified
in the “Output Size” list is used.
The available settings differ depending on the options that are installed.
Settings: Tray 1, Tray 2 through Tray 5 (options), Bypass
2
Note
If “Hagaki” or an envelope or non-standard size is selected in the “Origi-
nal Size” list, only “Tray 1” and “Bypass” are available.
Only “Tray 1” and “Bypass” are available when “Paper Type” is set to
“OHP”, “Thick Paper” or “Envelope”.
Paper Type
Select the type of paper to be printed on.
Settings: Plain Paper, OHP, Thick Paper, Envelope
2
Note
A setting can be selected only when “Paper Source” is set to “Tray 1” or
“Bypass”.
“OHP” can be selected only when “Original Size” is set to “Letter” or
“A4”.
Bypass tray
Tray