Filter
Top Products
Network settings
7
IC-206 7-47
3 Type in the administrator access code, and then press the [OK] key.
– The manufacturer’s default setting is “000000”.
– If the code was incorrectly entered, press the [Clear/Stop] key to
erase the number, and then type it in correctly.
4 Press the [,] or [+] key until “USER SETTING” is selected, and then
press the [OK] key.
5 In the “USER SETTING” menu, press the [,] or [+] key until “NTP
SERVER ADDRESS” is selected, and then press the [OK] key.
6 Use the keypad to type in the NTP server address, and then press the
[OK] key.