Konica Minolta 163 Network Card User Manual


 
Network settings
7
IC-206 7-37
5 In the “LDAP SETTING” menu, press the [+] or [,] key until “LDAP
SERVER ADDR.” is selected, and then press the [OK] key.
6 Type in the IP address or host name for the LDAP server.
The host name can contain a maximum of 64 characters.
To specify a host name for the LDAP server, the DNS setting must
be specified.
For the IP address or host name of the LDAP server, consult with
the network administrator.
If the setting was incorrectly entered, press the [Clear/Stop] key to
erase it, and then type it in correctly.
7 Press the [OK] key.
After the message “ACCEPTED” appears, the “LDAP SETTING” menu
appears again.
Specifying the LDAP port number
1 In the “LDAP SETTING” menu, press the [+] or [,] key until “LDAP
PORT NO.” is selected, and then press the [OK] key.