Filter
Top Products
1
Getting ready
1-12 IC-206
1.4 Connecting to a local area network (LAN)
This machine can transmit with the TCP/IP protocol on a LAN. Therefore, this
machine must be connected to the LAN with a network cable.
Connecting the network cable
Insert one plug on the network cable into the network port (LAN) on the left
side of the machine, and then insert the other plug into an available port on
the network hub.
2
Reminder
The network cable is not included with this machine; therefore, use Cat-
egory 5 or 5e cable for the network cable.
Network port LEDs
LED1 (LINK): This indicator lights up when the network cable is correctly con-
nected. If this indicator does not light up, even if it is assumed that the cable
is correctly connected, check the connection again. If this indicator still does
not light up, even though both ends are correctly connected, the network ca-
ble may damaged.
LED2 (ACT): This indicator flashes while data is being sent or received.
LED1
LED2