Filter
Top Products
3
Network printing
3-6 IC-206
LPR/PORT9100 printing
1 Connect the network cable. (Refer to “Connecting to a local area net-
work (LAN)” on page 1-12.)
2 From the machine’s control panel, specify the IP address, subnet mask
and default gateway. (Refer to “Specifying an IP address” on page 3-9.)
3 Print the settings information, and then check the settings. (Refer to
“Printing the settings information” on page 3-13.)
4 Install the printer driver.
– For details on installing the PCL driver, refer to “Installing the printer
driver by using the Add Printer Wizard” on page 2-15.
– If the GDI driver is to be installed, refer to the User’s Guide for the
GDI printer controller, included with this machine.
5 Add the network port to the computer. (Refer to “Connecting the com-
puter and this machine over a network” on page 3-15.)