Filter
Top Products
Installing the printer driver
2
IC-206 2-7
2.4 Installing the printer driver by using Plug and Play
Connecting to the computer’s USB port
When this machine is connected to a computer with a USB cable, Plug and
Play detects the device, and then installation of the necessary drivers begins.
1 Start Windows, and then insert the CD-ROM/DVD into the computer’s
CD-ROM drive.
2 Turn on this machine.
3 After this machine starts up and is ready for copying, connect it to the
computer with the USB cable.
This machine is detected, and the Found New Hardware Wizard (Add New
Hardware Wizard on Windows Me) appears.
The remainder of the procedure differs depending on the operating system.
Follow the appropriate procedure according to the operating system being
used.
- For Windows XP and Windows Server 2003: “Installing using Plug and
Play on Windows XP/Server 2003” on page 2-8
- For Windows Vista: “Installing using Plug and Play on Windows Vista” on
page 2-10
- For Windows 2000: “Installing using Plug and Play on Windows 2000” on
page 2-12
- For Windows Me: “Installing using Plug and Play on Windows Me” on
page 2-13
2
Note
With Windows XP, Server 2003, Vista and 2000, log on as a user with Ad-
ministrator privileges to install the printer driver.