Konica Minolta 163 Network Card User Manual


 
7
Network settings
7-40 IC-206
2 Type in the attribute.
The attribute can contain a maximum of 32 characters.
For the attribute, consult with the network administrator.
If the setting was incorrectly entered, press the [Clear/Stop] key to
erase it, and then type it in correctly.
3 Press the [OK] key.
After the message “ACCEPTED” appears, the “LDAP SETTING” menu
appears again.
Selecting the search method
1 In the “LDAP SETTING” menu, press the [+] or [,] key until “SEARCH
METHOD” is selected, and then press the [OK] key.
2 Press the [+] or [,] key until “BEGIN”, “CONTAIN” or “END” is select-
ed, and then press the [OK] key.
Whether “BEGIN”, “CONTAIN” or “END” is selected, the message
“ACCEPTED” appears, and then the “LDAP SETTING” menu ap-
pears again.