Filter
Top Products
Setting Up the PCL Driver
5
C351 5-7
Selecting the Paper Source
When changing the paper type, you can register it to an input tray and you
will be able to select the input tray according to the desired paper type.
1 Click the Setup tab.
2 From the “Paper Source” drop-down list, select the paper drawer that
contains the paper to be used.
Setting the Paper Source of the Paper Type
Follow the procedure described below to assign a paper type to a paper
drawer.
1 Click the [Paper Type Settings] button.
2 Select the “Paper Source” being changed, and then click the [Edit] but-
ton.
3 Select the desired setting from the “Paper Type” drop-down list, and
then click the [OK] button.