Filter
Top Products
Setting Up the PPD Driver (Windows)
7
C351 7-2
Graphics Tab
Device Options Tab
To specify the following printer-specific options, right-click the printer icon in
the Printers window, and then click “Properties” in the menu that appeared.
Item Function
Resolution Specifies the print resolution.
Color Control Specifies whether to adjust the color to that on the screen.
Halftone Specifies the halftone number of lines and the pattern angle.
Other Prints a negative or mirror image.
Magnification Specifies the enlargement and reduction ratio.
Item Function
Collate Specifies whether to print multiple copies in sets.
Offset When printing multiple copies, shifts the output position of each set.
Binding Position Specifies the binding position.
Duplex Specifies duplex printing.
Special Mode Specifies booklet printing.
Staple Performs stapling.
Hole Punch Performs hole punching.
Fold Performs folding.
Front Cover Attaches a front cover page.
Front Cover Tray Selects the input tray for the front cover.
Back Cover Attaches a back cover page.
Back Cover Tray Selects the input tray for the back cover.
OHP Interleaving Inserts interleaves between overhead projector transparencies.
OHP Interleaving Tray Selects the input tray for the transparency interleaves.
Stop Stops printing temporarily after part of the document has been print-
ed so that the proof print can be checked.
Color Selection Specifies whether to print in color or grayscale.
Gloss Mode Prints using a gloss finish.
Original Document Type Prints with a quality suitable for the original document.
Color Matching (Text) Adjusts the color quality of the text in a document.
Grayscale (Text) Specifies whether to enable grayscale of the text in a document.
Screening (Text) Specifies screening of the text in a document.
Color Matching (Photo) Adjusts the color quality of photos in a document.