Filter
Top Products
Various Settings
10
C351 10-25
Parallel I/F
You can specify the mode for using a parallel interface. (Default setting: ECP)
1 On the Administrator Setting screen, touch [7 Printer Setting].
– For details on displaying the Administrator Setting screen, refer to
“To display the Administrator Setting screen” on page 10-21.
2 On the Printer Setting screen, touch [2 Parallel I/F].
The Parallel I/F screen appears.
3 Touch the button for the desired setting.
4 Touch [OK].
The parallel interface mode is set.
To cancel changes to the settings, touch [Cancel].