Filter
Top Products
Setting Up Network Printing
3
C351 3-9
5 Specify settings for the following:
SMB Print: Set whether to use the SMB printing service. Select “Ena-
ble” here.
NetBIOS Name: Specify the NetBIOS name (up to 15 alphanumeric
characters).
Print Service Name: Specify the printing service name (up to 31 alpha-
numeric characters).
Work Group: Specify the work group name (up to 15 alphanumeric
characters).
6 To apply the settings, restart this machine (turn it off, then on again).
– When turning the main power switch OFF then ON, wait for 10 sec-
onds or longer before turning it ON again; otherwise the copier may
not function normally.
Printer Driver Settings
For Windows 98SE/Me
1 Click the [Start] button, point to “Settings”, and then click “Printers”.
2 Right-click the icon of the installed printer, and then click “Properties”.
3 On the Details tab, click the [Add Port] button.
4 Select “Network”, and then click the [Browse] button. In the network
configuration window that appears, select the appropriate printer icon.
For Windows 2000/XP/NT 4.0/Server 2003
1 For Windows 2000/NT 4.0, click the [Start] button, point to “Settings”,
and then click “Printers”.
For Windows XP/Server 2003, click the [Start] button, and then click
“Printers and Faxes”.
2 Right-click the icon of the installed printer, and then click “Properties”.
3 Click the [Add Port] button on the Ports tab, double-click “Local Port”
or select “Local Port” and click the [New Port] button, and then enter
“\\<NetBIOS_name>\<printing_service_name>”.
– Enter the same NetBIOS name and printing service name that you
entered in PageScope Web Connection. For the setting procedure,
refer to “Operations on This Machine” on page 3-8.
4 Click the [Close] button to apply the setting.