Filter
Top Products
Specifying Utility mode parameters
3
C550 3-23
18 If necessary, specify settings for “anonymous”, “PASV mode”, “Proxy”
and “Port Number”.
– To enter a port number, press the [C] (clear) key to clear the current
value, and then use the keypad to type in the port number.
– If a value outside the allowable range is specified, the message “In-
put error” appears. Type a value within the allowable range.
19 Touch [OK].
The FTP destination is registered.
!
Detail
To check a registered destination, select it, and then touch [Check Job
Set.].
To change the settings for a registered destination, select it, and then
touch [Edit]. The registration number cannot be changed in the Edit
screen.
To delete a registered destination, select it, and then touch [Delete].
2
Note
The registration cannot be completed if no settings are specified for
“Name”, “Host Address”, “File Path”, “User ID” and “Password”.
To cancel the registration, touch [Cancel].
To finish specifying settings in the Utility mode, press the [Utility/Counter]
key. Otherwise, exit the Utility mode by touching [Close] in each screen
until the screen for the Copy, Fax/Scan or Box mode appears.
WebDAV
Settings can be specified for the following for the FTP destination to be reg-
istered.
Parameter Description
No. Type in the registration number (between 1 and 2000) for the address book
destination. When the screen appears, the displayed number is the lowest
available number.
Name Type in a name of 24 characters or less for the registered destination.
Index Select the index characters. For frequently used destinations, touch [Fa-
vorites] so that the destination can be found more easily.