Filter
Top Products
Network Settings
4
C550 4-91
4.11 S/MIME Communication Settings
Before specifying settings to use S/MIME
By specifying settings for S/MIME communication, e-mail messages can be
sent encrypted. In order to enable the S/MIME settings, a digital certificate
for each destination must be registered. Digital certificates can be registered
using any of the following three methods.
The following procedure describes how to register certificates by sending e-
mail messages to this machine.
2
Note
Register the e-mail address as a destination that uses S/MIME transmis-
sion.
Before sending e-mail, the “Automatically Obtain Certificates” parameter
(available from the S/MIME Communications Settings screen) must first
be set to “Yes”.
1 From the machine’s control panel, register in the address book an e-
mail address registered with a certificate.
Method Description
Registering certificates by
sending e-mail messages
to this machine
The certificate is registered by sending an e-mail message to this
machine from the client computer to be the e-mail destination. The
procedure is described below.
Registering certificates
with the LDAP server
Certificate files registered on the LDAP server are searched for and
retrieved. For details, contact the network administrator.
Specifying the setting
when using PageScope
Web Connection to regis-
ter destinations
Specify where certificate information is saved when using Page-
Scope Web Connection to register the destination. For details, re-
fer to the PageScope Web Connection User’s Guide.