Filter
Top Products
Scanning
2
C550 2-47
– For details on the scan settings, refer to “Specifying scan and
transmission settings (Scan Settings/Original Settings/Communi-
cation Settings)” on page 2-68.
5 Load the document into the ADF or place it on the original glass.
6 Press the [Start] key in the control panel.
Scanning of the document begins, and the data is sent.
2
Note
Do not turn off the machine until the scan job is deleted from the Job List
screen.
Entering addresses directly
Using the control panel to directly type in the destination address when
scanning is called “direct input”.
Settings can be specified for the following.
1 Press the [Fax/Scan] key
in the control panel.
The Fax/Scan mode
screen appears.
Parameter Description
Host Name Specify the host name (in uppercase letters) or IP address for the
destination. Type using the keyboard that appears, and then touch
[OK].
File Path Type the path to the destination folder in uppercase letters.
User Name Type in the user name used to log on, and then touch [OK].
Password Specify the password. Type using the keyboard that appears, and
then touch [OK].
Reference Check the structure of the folders on the destination computer. This
can be used to directly specify the destination folder.