Filter
Top Products
Scanning
2
C550 2-55
4 To specify advanced settings, touch [Detailed Settings], and then
specify the settings.
5 Touch [OK], and then touch [OK] in the next screen that appears.
6 Touch [Scan Settings], [Original Settings] or [Communication Settings],
and then specify the desired scan settings.
– For details on the scan settings, refer to “Specifying scan and
transmission settings (Scan Settings/Original Settings/Communi-
cation Settings)” on page 2-68.
7 Load the document into the ADF or place it on the original glass.
8 Press the [Start] key in the control panel.
Scanning of the document begins, and the data is sent.
2
Note
Do not turn off the machine until the scan job is deleted from the Job List
screen.