Filter
Top Products
Specifying Utility mode parameters
3
C550 3-48
2 Touch [TWAIN Lock Time].
3 Press the [C] (clear) key to erase the value, and then use the keypad to
specify the desired length of time (between 30 and 300 seconds).
– If a value outside the allowable range is specified, the message “In-
put error” appears. Type a value within the allowable range.
4 Touch [OK].
The TWAIN lock time is set.
2
Note
To finish specifying settings in the Utility mode, press the [Utility/Counter]
key. Otherwise, exit the Utility mode by touching [Close] in each screen
until the screen for the Copy, Fax/Scan or Box mode appears.
If Konica Minolta TWAIN is being used, it is automatically unlocked at the
specified time, even if it was locked from the computer.