Filter
Top Products
Scanning
2
C550 2-49
4 Touch [Scan Settings], [Original Settings] or [Communication Settings],
and then specify the desired scan settings.
– For details on the scan settings, refer to “Specifying scan and
transmission settings (Scan Settings/Original Settings/Communi-
cation Settings)” on page 2-68.
5 Load the document into the ADF or place it on the original glass.
6 Press the [Start] key in the control panel.
Scanning of the document begins, and the data is sent.
2
Note
Do not turn off the machine until the scan job is deleted from the Job List
screen.
!
Detail
If the computers or workgroups on the network (subnet) that this machine
belongs to is more than the numbers listed below, browsing over the net-
work may not be performed correctly.
Workgroups: 128
Computers: 128