Scanning
2
C550 2-32
4 Touch [Scan Settings], [Original Settings] or [Communication Settings],
and then specify the desired scan settings.
– For details on the scan settings, refer to “Specifying scan and
transmission settings (Scan Settings/Original Settings/Communi-
cation Settings)” on page 2-68.
5 Load the document into the ADF or place it on the original glass.
6 Press the [Start] key in the control panel.
Scanning of the document begins, and the data is sent.
2
Note
Do not turn off the machine until the scan job is deleted from the Job List
screen.
Selecting a group destination
“Group” refers to multiple destinations that are registered collectively. Follow
the procedure described below to send data by selecting a group that has
been registered in advance.
For details on registering group destinations, refer to “Registering a group
destination” on page 3-28.
!
Detail
In order to select a group destination, “Address Book Default” (displayed
by touching [Custom Display Settings] on the User Settings screen, then
[Fax/Scan Settings]) must be set to “Address Type”
For details, refer to “Default Address Book” on page 3-43.
If the destination types are not displayed in the index, touch [Search], and
then search for destinations in the group destination type.