Filter
Top Products
Before using scanning functions
1
C550 1-2
1 Before using scanning functions
1.1 Environment required for using scanning functions
The following conditions are required in order to use the network scanning
features.
- The machine is connected to the network. (required)
The machine can be used over a TCP/IP network. First, connect the cable
for connecting to the network. For details, refer to “Network connection”
on page 1-10. In order to use this machine on a network, settings such
as the IP address of the machine must be specified. For details, refer to
chapter 4, “Network Settings” on page 4-2.
- The driver software is installed on the computer.
In order to use this machine as a scanner, the dedicated software KONI-
CA MINOLTA TWAIN must be installed. For details, refer to the TWAIN
driver manual on the User Software CD-ROM.