Filter
Top Products
Troubleshooting 6-11
Multi copies cannot be printed because RAM disk is disabled or the hard disk is
not installed. Try adding more memory or installing hard disk, and configuring
the RAM disk settings.
This message is displayed when the optional paper feeder PF-510 is not
connected to a power source and COATED (coated paper) is selected as the
paper type setting. Connect it to a power source via the printer.
Displayed when the installed toner is the original Kyocera Mita product.
A paper jam has occurred. The location of the paper jam is indicated in place of
the #’s. For details, refer to Clearing Paper Jams on page 6-16.
The selected cassette is being prepared.
There is no paper cassette in the feeder, or the cassette is not inserted properly.
After reinserting the paper cassette, you should be able to print. When two or
more optional feeders are installed and the lowest one is selected, the same
message will appear if any of the upper paper feeder and the printer cassette is
improperly installed.
The data transferred to the printer was too complex to print on a page. Press
[OK] to resume printing.
Message Corrective Action
No multi copies.
Press [OK].
Disconnect the power
cord from the machine
and connect it to the
multi purpose feeder.
Original toner
installed.
Paper
jammed in
############
Loading paper.
Paper path error.
Set cassette.
Print overrun.