Filter
Top Products
2-2 Printing Operation
Changing Network Interface Parameters
This printer supports TCP/IP, TCP/IP (IPv6), NetWare, AppleTalk, IPP,
SSL Server and the IPSec protocols and Security Level.
The table below shows the items required for each of the settings.
Configure the printer's network parameters as appropriate for your PC
and your network environment.
For details of the procedure, refer to Using the Operation Panel on page
4-1.
Menu Submenu Setting
Network TCP/IP Set. TCP/IP On/Off
IPv4
Setting
DHCP On/Off
IP Address IP address
Subnet Mask IP address
Default
Gateway
IP address
Bonjour On/Off
IPv6
Setting
TCP/IP(IPv6) On/Off
RA(Sateless) On/Off
DHCPv6 On/Off
Security Network Security Netware Off/On
Frame type
AppleTalk On/Off
IPP On/Off
SSL
Setting
SSL On/Off
IPP over SSL On/Off
HTTPS On/Off
IPSec On/Off
Note After all network related settings have been done, turn the
machine OFF and ON again.
This is mandatory to make the settings effective!