Filter
Top Products
3.13 Other Modes
3-59
6
66
6
Press the U or V key to increase or decrease the
value at the blinking cursor and set the desired time.
The timeout time can be between 0 and 495 seconds,
in 5-second increments. Use the Z and Y keys to
move the cursor right and left.
7
77
7
When the desired timeout time is displayed, press the
ENTER key.
8
88
8
To exit the menu selection, press the MENU key.
3.13.3 Setting the Sleep Timer
The printer has a sleep timer that is used to conserve power
when the printer is not printing, processing, or receiving data.
You can turn off or on the sleep timer function using the
following procedure.
1
11
1
Press the MENU key.
2
22
2
Press the U or V key repeatedly until Others >
appears.
3
33
3
Press the Z key.
4
44
4
Press the U or V key repeatedly until >Sleep
Timer > appears.
5
55
5
Press the Z key and display >>Sleep Mode.
6
66
6
To turn off the sleep timer, press the ENTER key. A
blinking question mark (?) appears.
7
77
7
Press the U or V key to change On to Off.
8
88
8
Press the ENTER key. The sleep timer is turned off.
9
99
9
To exit the menu selection, press the MENU key.
Sleep timer timeout
You can adjust the timer timeout time, the length of time the
printer waits before entering sleeping mode in the absence of
data. The default sleep timer timeout time is 30 minutes.
The printer reverts to normal operation mode when the
printer receives a print job, the operator panel is operated, or
one of the exterior covers is opened.
Note
Color calibration is automatically executed
before the printer reverts to normal operation
mode.
To confirm and change the timeout time, proceed as follows:
1
11
1
Press the MENU key.
2
22
2
Press the U or V key repeatedly until Others >
appears.
3
33
3
Press the Z key.
4
44
4
Press the U or V key repeatedly until >Sleep
Timer > appears.
5
55
5
To change the timeout time, press the ENTER key. A
blinking cursor (_) appears.
Others >
>Sleep Timer >
030 min.
>>Sleep Mode
On
>>Sleep Mode
? On
>>Sleep Mode
? Off
Others >
>Sleep Timer >
030min.
>Sleep Timer
030
min.