Lenovo 20AQ004JUS Laptop User Manual


 
Table 4. Cong menu items (continued)
Menu item
Submenu item
Value
Comments
Auto
If you select Auto, it
enables you to connect and
route appropriate USB 3.0
or USB 2.0 connectors.
If you select Enabled, it
enables USB 3.0 mode
and allows USB 3.0 to be
supported in the operating
system.
If you select Disabled, it
disables and hides the USB
3.0 controller, and USB 3.0
connectors will work as
USB 2.0 connectors.
TrackPoint Disabled
Enabled
Enable or disable the
built-in TrackPoint pointing
device.
Note: If you want to use
an external mouse, select
Disabled.
Trackpad Disabled
Enabled
Enable or disable the
built-in trackpad.
Note: If you want to use
an external mouse, select
Disabled.
Keyboard/Mouse
Fn and Ctrl Key swap
Disabled
Enabled
If you select Enabled, the
Fn key works as the Ctrl
key, and the Ctrl key works
as the Fn key.
Note: Even when Enabled
is selected, you need to
press Fn to resume the
computer from sleep mode
to normal operation.
Display Boot Display Device
ThinkPad LCD
Analog (VGA)
Digital on ThinkPad
Display on dock
Select the display device
that is to be activated at
boot time. This selection
is effective for boot time,
password prompt, and
ThinkPad Setup.
Digital on ThinkPad is the
Mini DisplayPort connector
on your computer.
Display on dock is
DisplayPort, DVI or VGA
104 User Guide