Filter
Top Products
Table 4. Cong menu items (continued)
Submenu item Selection Comments
Wake On LAN
• Disabled
• AC only
• AC and Battery
Enable the system to Power on when
the Ethernet controller receives a
magic packet.
If you select “AC Only,” Wake On
LAN is enabled only when ac power
adapter is attached.
If you select “AC and Battery,” Wake
On LAN is enabled with any power
sources.
Note: AC is required with magic
packet type Wake On LAN.
Note: Wake On LAN function does
not work when a hard disk password
is set.
Ethernet LAN Option ROM
• Disabled
• Enabled
Load the Ethernet LAN Option ROM
to enable startup from an integrated
network device.
USB
USB UEFI BIOS Support
• Disabled
• Enabled
Enable or disable boot support for
USB diskette, USB memory key, and
USB optical drive.
Always On USB
• Disabled
• Enabled
If you select “Enabled,” the external
USB devices can be charged via
USB ports even when the system is
in sleep mode, hibernation mode, or
power-off mode.
Always On USB Charge in off mode
• Disabled
• Enabled
If you select “Enabled,” the Always On
USB connector enables you to charge
some devices, such as iPod and
iPhone and BlackBerry smartphones.
Note: If you want to charge these
devices when your computer is in
hibernation mode or powered off, you
will need to open the Power Manager
program and congure corresponding
settings to enable the Always On USB
connector function. For details about
how to enable the Always On USB
connector function, refer to the online
help of the Power Manager program.
Keyboard/Mouse
TrackPoint • Disabled
• Enabled
Enable or disable the built-in
TrackPoint.
Note: If you want to use an external
mouse, select “Disabled.”
106 User Guide