Filter
Top Products
4. Click the icon for the desired monitor (the Monitor-2 icon is for the external monitor).
5. Click Advanced Settings.
6. Click the Monitor tab.
7. Select the correct screen refresh rate.
• Problem: Wrong characters appear on the screen.
Solution: Did you follow the correct procedure in installing the operating system or application program?
If you did, have the external monitor serviced.
• Problem: The Extend desktop function does not work.
Solution: Enable the Extend desktop function by doing the following:
1. Connect the external monitor to the monitor connector, and then connect the monitor to an electrical
outlet.
2. Turn on the external monitor and the computer.
3. Right-click on the desktop, and click Screen resolution.
4. Click the Monitor-2 icon.
5. Select Extend these displays for Multiple displays.
6. Click the Monitor-1 icon (for the primary display, the computer display).
7. Select the Resolution of the primary display.
8. Click the Monitor-2 icon (for the external monitor).
9. Select the Resolution of the secondary display.
10. Set the relative position of the each monitor by dragging its icon. You can set the monitors in any
relative position, but the icons must touch each other.
11. Click OK to apply the changes.
Note: To change the color settings, right-click on the desktop, and click Screen resolution. Click
Advanced Settings, select the Monitor tab, then set Colors.
• Problem: Display switching does not work.
Solution: If you use the Extend desktop function, disable it, and change the display output location. If
a DVD movie or a video clip is playing, stop the playback, close the application, and then change the
display output location.
• Problem: If you use the Extend desktop function, you cannot set a higher resolution or higher refresh
rate on the secondary display.
Solution: Change the resolution depth to lower settings for the primary display. Refer to the “Solution” for
“The Extend desktop function does not work” above.
• Problem: The screen position on the external monitor is incorrect when that monitor is set for a high
resolution.
Solution: Sometimes, when you use a high resolution such as 1600x1200, the image is shifted to left
or right on the screen. To correct this, rst make sure that your external monitor supports the display
mode, that is, the resolution and the refresh rate, that you have set. If it does not, set a display mode that
the monitor supports. If it does support the display mode you have set, go to the setup menu for the
monitor itself and adjust the settings there. Usually the external monitor has buttons for access to the
setup menu. For details, see the reference manual for the monitor.
134 User Guide