Lexmark 5400 All in One Printer User Manual


 
3 Connect the other end of the telephone cord into an active telephone wall jack.
Connecting to a telephone
Connect a telephone to the printer to use the fax line as a normal telephone line. Then set up the printer wherever your
telephone is located to make copies or to send and receive faxes without using a computer.
Note: Setup steps may vary depending on your country or region. For more information on connecting the printer to
telecommunications equipment, see “Using an RJ11 adapter” on page 14.
1 Make sure you have the following:
A telephone
Two telephone cords
A telephone wall jack
2 Connect one telephone cord to the LINE port of the printer, and then plug it into an active telephone wall jack.
5
1
2
3
4
6
7
3 Remove the protective plug from the EXT port of the printer.
17