Filter
Top Products
Dial Registration
Facsimile Programming 4 - 24
7
Enter the 20-digit Relaybox ID.
8
Enter the 20-digit Relaybox password.
Once this function has been programmed, you use it by
simply pressing the One-Touch Key you have just programmed. This is documented in
Chapter 3 Advanced Facsimile.
Edit/Deleting
1
If you wish to change any entry, a screen allows you to accept or change.
2
If you wish to change a Key that was previously
programmed, this message appears. Press YES to
keep this location as is, or NO if you wish to edit it.
3
If you choose NO, use the arrow keys to select
either EDIT or DELETE and then proceed with the
needed changes.
Batch TX
You can program your single location One-Touch Key to automatically batch
documents. By assigning a batch time to a programmed One-Touch Key, you can
eliminate repeated calls to the same number throughout the day. Your unit calls the
remote unit at a preset time and transmits all documents stored in memory for this
particular destination in one phone call.
Entering
1
Press the PROGRAM Key and scroll through the
menus until you reach the DIAL REGISTRATION
Menu. Press YES to begin programming.
2
Press 5 or scroll down to the Batch TX menu and
press YES.
3
Press the One-Touch Key you wish to use.
RELAYBOX ID=
OK=YES (DEL=NO)
PASSWORD=
OK=YES (DEL=NO)
REGISTERED! KEEP?
OK=YES (EDIT/DEL=NO)
EDIT *DELETE
-SELECT&PUSH”YES”-
DIAL REGISTRATION?
YES / or 1-6
5 BATCH TX?
OK=YES
-SELECT REGIST.KEY-
OK=YES