Filter
Top Products
Sending a Document
Basic Operations 2 - 2
4
Use the RESOLUTION Key to select the desired resolution:
5
If you are sending a photograph, press the HALF TONE Key for best
results.
6
Enter the remote Fax number using the
numeric Key Pad.
•
The unit scans the document into
memory and sends it to the location you selected.
•
The unit automatically returns to standby mode when finished
transmitting.
7
To stop a transmission, press the STOP Key.
Memory Overflow Transmit
When your unit senses it runs out of memory if a half page of your document is
being scanned in ADF, it will stop
transmission and following LCD
messages appeared, press the STOP key
to recover your machine at stand by state
and press STOP key again to reject your
document out from ADF.
Note: Prior to placing the original face down on the document feeder for
transmission, the fax number can be entered on the MINOLTAFAX 2800 /
3800. This enables you to reference the fax number on the original, enter the
number and then place the original face down for transmission.
Use this setting for this
Standard Documents with standard size characters, such as typed documents.
Fine Documents with smaller size characters, like newsprint.
(Copy Default)
Extra Fine Documents with very fine or light characters.
ENTER FAX NO.
or FUNCTION
0
TUV
8
#
9
WXYZ
START
3
2
JKL
5
MNO
6
ABC
DEF
STOP
COPY
CAUTION
MEMORY FULL
* CAUTION*
MEM.FULL/TX CANCEL
In this situation ADF TX is recommended,
it will scan one page and TX one page and scan one page and so on, refer to page
4-27