Filter
Top Products
Setting up the Internet Fax
Internet Fax(Option) 5-12
Basic Operations of Internet Fax
Manual Transmission(Single Location)
The procedure to manually send an E-mail message from your device is very similar to
manually transmitting a document to a facsimile device over the telephone line.
1 Place the documents in the
Document Feeder.
2 Press the MAIL Key on the control panel.
3 Enter the E-mail address.Then press START to
begin the transmission.
********
1 If you want to change the FROM: location in the E-
mail message, press the Down Arrow Key.
2 Enter the E-mail address you want to appear in the
FROM and press START. If you want to change
the location for reply, press the Down Arrow Key.
3 Enter the E-mail address for replies and press
START. If you want to change the encoding
method used for the TIFF attachment, press the
Down Arrow Key.
4 Use the Left/Light Arrow Key to change the coding
selection. You must be sure that the remote
location can handle the coding type. Then press
YES to transmit.
ENTER FAX NO.
or FUNCTION
*INTERNET FAX*
TO=
OK=START (FROM= )
@T (jim@aol.com) 99%
-SET DOC. FACE DOWN-
*TX COMPLETE*
TO=
OK=START (FROM= )
FROM=
OK=START (REPLY= )
REPLY=
OK=START (CODING= )
MH MR *MMR JBIG
-SELECT&PUSH”YES”-