Filter
Top Products
Dial Registration
Facsimile Programming 4 - 18
Dial Registration
This section gives instructions on how to program the number to be stored in the One-
Touch, Speed Dial and Group Dial Keys. In addition, it shows you how to set up special
parameters for each One-Touch Key, including batch Time and Relay Broadcast.
One-Touch Keys
You can program the most frequently dialed fax numbers into One-Touch Keys, 32 One
Touch Keys is applicable for MINOLTAFAX2800, 64 One Touch Keys for
MINOLTAFAX3800. This allows you to transmit documents simply by pressing a One-
Touch Key and the START Key. You can program any of the One-Touch Keys as
Group Dial Keys with up to 50 locations in each.
1
Press the PROGRAM Key and scroll through the
menus until you reach the DIAL REGISTRATION
Menu. Press YES to begin programming.
2
Press YES since this is the first menu to appear and
press YES to enter the One-Touch Program.
3
Press the One-Touch Key you wish to program.
4
Press YES to accept your selection.
5
Enter the Telephone number you wish to transmit
to and press YES. If you want to enter the sub-
address, press the down Arrow Key.
6
You can press the sub-address up to 10-digit.
7
Enter the Name you wish associated with this
number and press YES after checking to see it OK.
DIAL REGISTRATION?
YES / or 1-6
1 ONE-TOUCH DIAL?
OK=YES
-SELECT REGIST. KEY-
ONE-TOUCH 01
or PRESS “YES”
OK=YES (SUB= )
SUB=_
OK=YES
NAME=_
OK=YES