Filter
Top Products
Set Printer
PC Printing & Scanning 6 - 6
GDI Enhance
Allows users to select the GDI printer driver which supports 600 dpi. Additional
memory is necessary for printing documents at 600 dpi.
Note: If your unit generates a “MEMORY FULL” report while
attempting to print a document using PCL4 emulation, or the
Window GDI Driver and does not print your document, your unit
requires additional memory.
Note: Since the fax unit must be turned OFF when switching to
PCL4 emulation or GDI enhance, make sure that any documents
stored in memory are printed out first.
1
Press the PROGRAM Key and scroll
through the menus until you reach the Set
Printer menu and press YES.
2
Press 7 or scroll down to the GDI Enhance
menu and press YES.
3
Select either ON or OFF depending on
your needs. Press YES to accept this data
into memory.
4
If you chose YES, you must restart your
unit to make this change active.
SET PRINTER?
YES / or 1-8
8 GDI ENHANCE?
OK=YES
ON *OFF
-SELECT&PUSH”YES”-
PCL4/GDI CHANGE
RESTART YOUR FAX