Filter
Top Products
Document Scan Settings
4 - 15 Facsimile Programming
Reduction Copy
This function allows you to have the document printed by one of the two modes
described below:
Note: Reduction copy capabilities are not available when the resolution
setting is set to Half Tone.
1
Press the PROGRAM Key and scroll through the
menus until you reach the SCANNING &
PRINTING Menu. Press YES to begin
programming.
2
Press 4 or scroll down to the Reduction Copy menu
and press YES.
3
Using the Left and Right arrows, select the option
you wish to have as the default and press YES to
enter this selection into memory.
Choices Available Description
ON The facsimile machine will reduce the copy document as
needed to fit on the paper. The maximum reduction proportion
is 70%. If greater reduction is needed, then the remainder of the
document will be printed on the next page.
OFF The facsimile machine will not reduce the copy document and
will instead print the remainder of the document on the next
page.
SCANNING&PRINTING?
YES / or 1-5
4 REDUCTION COPY?
OK=YES
*ON OFF
-SELECT&PUSH”YES”-