Filter
Top Products
VII Safety Information
CE Marking (Declaration of Conformity)
The product complies with the following EU directives:
89 / 336 / EEC, 73 / 23 / EEC and 93 / 68 / EEC directives.
This declaration is valid for the area of the European Union.
WAR NING:
This device must be used with shielded interface cables. The use of
non-shielded cable is likely to result in interference with radio
communications and is prohibited under the EU Directive rules.
The machine has been approved in accordance with Council Decision 1999/5/EC for pan-
Europen single terminal connection to the public switched telephone network (PSTN).
However, due to differences between the individual PSTNs provided in different countries,
the approval does not, of itself, give an unconditional assurance of successful operation on
every PSTN network termination point.
In the event of problems, you should contact your equipment supplier in the first instance.
Note: The manufacturer should ensure that the vender and user of equipment is
clearly informed of the above information by means of packaging and/ or other
forms of user instructions.
This product is approved for DTMF dialing only. When directly connected to the public
switched telephone network (PSTN mode) pulse dialing can not be used.
(Pulse dialing may only be used when this product is connected to a PBX).
If an additional telephone is connected to FAX unit, the LF (Loading Factor) should not be
greater than 30.