Filter
Top Products
Machine Operations
4 - 11 Facsimile Programming
Setting the Power Save Mode
This program allows the user to set their fax unit to automatically enter the power saving
mode at a specified time. You can also set the Power Save Mode to OFF. If the ON time
and the OFF time are set the same, the Power Save Mode will remain ON continuously.
1
Press the PROGRAM Key and scroll through the
menus until you reach the Machine Operations
menu and press YES.
2
Press 7 or press the down arrow six times to reach
the Power Saver Mode Menu. Press YES.
3
Use the Left/Right Arrow Keys to select either OFF
or TIMER and press YES.
Note: The ON time refers to the time the unit will go into Power Save Mode.
The OFF time is the time it will re-enter a READY or STANDBY mode.
4
Enter the time you wish the unit to enter Power
Save Mode and press YES.
5
Enter the time you wish the unit to leave Power
Save Mode and return to normal operation.
Note: There are three situations to leave Power Save Mode and return to
normal operation.
1.Press Wakeup Key
2.Telephone rings.
3.Time up for Timer TX.
But if I-Fax / PCL4 / GDI / PCL5e is optioned, these devices can not
Wakeup the machine from Power Save Mode, before using these
devices be sure the machine is in normal operation, press Wakeup Key
to Wakeup the machine, if the machine is in Power Save Mode.
MACHINE OPERATION?
YES / or 1-8
7 POWER SAVE MODE?
OK=YES
OFF *TIMER
-SELECT&PUSH”YES”-
ON TIME=_0:00
OK=YES
OFF TIME=_0:00
OK=YES