Filter
Top Products
Dial Registration
4 - 21 Facsimile Programming
5
Enter the Group Name and press YES to accept.
6
Enter the Key(s) you wish included in this group.
Remember, you can include One-Touch or Speed
Dial already in memory.
7
Continue to enter the locations you wish to include and then press YES. You are given the
opportunity to program additional locations. Continue to enter additional Speed Dial
locations or press NO to exit.
Edit/Deleting
1
If you wish to change any entry, a screen allows you to accept or change.
2
If you wish to change a Key that was previously
programmed, this message appears. Press YES to
keep this location as is, or NO if you wish to edit it.
3
If you choose NO, use the arrow keys to select
either EDIT or DELETE and then proceed with the
needed changes.
Program Dial
Instead of their regular functions, any of the last eight One-Touch Keys MF3800 (57-
64), MF2800(25-32) can be used as Program Keys. Transmission functions including:
Broadcast, Timer TX (Delayed Transmission), Mailbox, Polling RX, and Relay
Initiation can be programmed into the programmed One-Touch Keys. This allows you to
“One-Touch” an operation that normally takes multiple key strokes.
Settings entered into these program keys remain in memory for future use.
Entering
1
Press the PROGRAM Key and scroll through the
menus until you reach the DIAL REGISTRATION
Menu. Press YES to begin programming.
2
Press 4 or scroll down to the Program Dial menu
and press YES.
GROUP NAME=_
OK=YES
NO.001=_
REGISTERED! KEEP?
OK=YES (EDIT/DEL=NO)
EDIT *DELETE
-SELECT&PUSH”YES”-
DIAL REGISTRATION?
YES / or 1-6
4 PROGRAM DIAL?
OK=YES