Linksys E2100L Network Router User Manual


 
Linksys E2100L Chapter 2: Cisco Connect
8
Advanced Wireless-N Router
3. Enter a name that will be used to identify this device.
Then click Finish.
Name Your Device
Wireless Printer
1. Refer to your printer’s documentation to learn how to
connect it to a wireless printer.
2. Enter the Network  name  (SSID), Security  Key, and
Security Type settings on your wireless printer. To print
this information, click Print these settings.
Connecting a Wireless Printer
3. Wait until your printer connects. On the Connecting a 
wireless printer screen, click Next.
4. Enter a name that will be used to identify this printer.
Then click Finish.
Name Your Printer
Guest Access
The Guest access settings screen appears.
Guest Access Settings
Allow guest access By default, guest access is enabled.
To disable guest access, select no.
Guest network name By default, the setup software sets
up the name of the guest network.
Password By default, the setup software sets up the
password for the guest network. To change the password,
click Change.
If you clicked Change, the Change guest password screen
appears.
Change Guest Password
Enter a new guest password Enter a password of
4-32 characters.
Click Change to save your setting.
Total guests allowed By default, 5 guests are allowed
Internet access through the guest network. Select the
appropriate number of guests allowed on your guest
network; you can select up to 10 guests.
Click Finish to save your settings.