Linksys E2100L Network Router User Manual


 
25
Advanced Wireless-N Router
Linksys E2100L Chapter 3: Advanced Configuration
Claim Disk
Enter a partition’s name Create a name for the partition.
To format the disk as FAT32, click Format and follow
the on-screen instructions. To update the on-screen
information, click Refresh.
Claim Disk
On the Disk screen, click Refresh to update the on-screen
information.
Create a Shared Folder
1. After you clicked Create Share, the Shared  Folder
screen appears.
Shared Folder
2. In the Display Name field, enter a name for the shared
folder. This will appear in the Shared Folder table on
the Disk screen.
3. The Partition name is displayed. If the shared folder
should include the entire partition, select Share entire
Partition and proceed to step 5.
If you do not want to share the entire partition, then
proceed to step 4 and specify the folder you want to
share.
NOTE: If you select Share entire Partition,
then all of the Groups with Access (see step 5)
can access any folder in the partition.
4. The Current Folder setting displays the selected folder.
To specify a different folder, click Select. To display
sub-folders, click Enter into Folder. To return to the
previous folder, click Return to Upper Folder.
If you want to create a new folder, enter its name in the
New Folder field. Then click Create.
5. To allow a group access to the shared folder, select it
from the Available Groups column, and then click the
>> button.
NOTE: Specify which user groups have
read-and-write or read-only access to the
shared folder.
6. To block a group from accessing the shared folder,
select it from the Groups with Access column, and then
click the << button.
7. Click Save Settings to apply your changes, or click
Cancel Changes to clear your changes. Click Close to
exit the screen and return to the Disk screen.