Filter
Top Products
29
Advanced Wireless-N Router
Linksys E2100L Chapter 3: Advanced Configuration
7. Click Save Settings to apply your changes, or click
Cancel Changes to clear your changes. Click Close to
exit the screen and return to the FTP Server screen.
Edit an FTP Folder
After you clicked Edit, the FTP Folder screen appears.
FTP Folder
Make the appropriate changes to the following options:
Display Name The current Display Name is shown. If you
want to change the name, enter a new name.
Partition The name of the partition is displayed.
Share entire Partition If the FTP folder should include
the entire partition, select this option. If you do not want
to share the entire partition, then select the folder you do
want to share.
New Folder If you want to create a new folder, enter its
name and then click Create.
Current Folder The selected folder is displayed.
Folder The available folders are listed by Folder name.
• Enter into Folder To display sub-folders, click this
option.
• Select To specify a folder, click Select.
• Return to Upper Folder To return to the previous
folder, click this option.
Access Specify which user groups have read-and-write or
read-only access to the FTP folders. (To create user groups,
refer to Create or Edit a Group Account, page 30.)
• Available Groups To allow a group access to the FTP
folder, select it, and then click the >> button.
• Groups with Access To block a group from accessing
the FTP folder, select it, and then click the << button.
Click Save Settings to apply your changes, or click Cancel
Changes to clear your changes. Click Close to exit the
screen and return to the FTP Server screen.
Storage > Administration
The Administration screen allows you to manage the user
groups and individual users who can access the shared
folders.
Storage > Administration
Information
Server Name Enter the server name for the Router; it
will be used for the disk and media server features. Use
only alphanumeric characters (letters A to Z and numbers
0 to 9) in the server name. The default server name of the
Router is Ciscoxxxxx (xxxxx are the last five digits of the
Router’s serial number).
NOTE: If you used the setup software for
installation, then the name of your wireless
network (up to 15 characters) is the server
name of the Router.
Workgroup Name Enter the workgroup name for the
Router; it should match the workgroup name of the
computers on your local network. The Router’s default is
workgroup.
Server LAN IP Address The local IP address of the Router
is displayed.
Server Internet IP Address The Internet IP address of
the Router is displayed.