Madrigal Imaging MP-9 Projector User Manual


 
Section 5
Specifications
5.1 Specifications MP-8 and MP-9
Note: Due to constant research, specifications are subject to change without notice.
Optics
High definition hybrid lens
Optical resolution of 10 line pairs per mm
8"(MP-8) and 9"(MP-9) electromagnetic focus CRTs
Scheimpflug adjustment for top, bottom, and side-to-side focus
Liquid coupling for optimized contrast ratio (MP-9 only)
Resolution
2500 x 2000 addressability
1500 x 1200 ANSI pixels for MP-9, 1350 x 1100 for MP-8
Brightness
Usable light output per industry standard:
160 ANSI lumens for MP-9, 200 ANSI lumens for MP-8
Display
Electronic geometry circuits separately correct top, bottom and sides
for flat, curved or rear screens up to 25 feet diagonal
Keystone circuitry to correct pictures for angles greater than ±15°
vertically from screen axis (dependent on throw distance)
Color temperature adjustment for precise setup
S and C vertical and horizontal linearity
Adjustable top, bottom and side blanking
9 zone electronic astigmatism correction (service adjustment)
Input Signals
RGB Video Input Level: 0.5 to 1.0 volts p-p, 75 ±1% terminated
Automatically switches to separate sync, composite sync, or sync on green
Separate or composite syncs are automatically accepted in either polarity
1.0 volts nominal audio input level
Sync on green: max horizontal frequency is 130 kHz
Sync input level: 0.3 to 5.0 volts p-p, 75 ±1% terminated
5.1