Filter
Top Products
Random Access ➤
Convergence
Press from the Convergence menu to
select Random Access Convergence. A red
and green crosshatch is displayed with a
rectangular box at the center zone. Above
the box, “CONV” indicates that the zone
is ready for convergence. Use the arrow
keys to move the red onto the green within
the box. This affects the position of the red
with respect to the green over the entire
screen (static convergence).
To change the convergence
color, press . Each
press of the Color key
changes the color as shown.
To move to another control
point, press . The
caption above the box changes to “MOVE.”
Use the arrow keys to move to another
zone for convergence. Press to
converge the zone. When all zones
requiring adjustment are converged, press
to display the Exit dialog box. Press
to save the new convergence settings.
To go back to the convergence screen,
move the cursor bar to “Continue Adjust”,
then press . To discard your changes,
select “No Save.”
Note: may be used instead of to alternate between converge and move
functions, if preferred.
ENTER
CONV
CONV
ENTER
ENTER
EXIT
ENTER
ENTER
1. COLOR
2. COLOR again
3. COLOR again
4. COLOR again
green
red
blue
blue
REFERENCE
COLOR
SEQUENCE
Press:
CONVERGENCE
COLOR
a white crosshatch for reference
repeat starting at green-red
COLOR
CONV
3
OPERATION
3.30